Прогресс хранится только в этом браузере и не требует AI-кредитов.
Цели обучения
✓Describe “Körper und Stoffe” using evidence from observation, measurement, or a model.
✓Describe “Masse” using evidence from observation, measurement, or a model.
✓Describe “Volumen” using evidence from observation, measurement, or a model.
✓Describe “Dichte” using evidence from observation, measurement, or a model.
✓Describe “Kraft” using evidence from observation, measurement, or a model.
Ключевые идеи и проверки
I draw a correct force or motion diagram.
I select a law from the givens and conditions.
Every solution or explanation for “Mechanik” should include a method, justification, and final check.
Раздел
Основная теория
Ключевые идеи главы в понятной последовательности перед практикой.
01
Define the system
Choose the body or system, define a positive direction, and mark every force or motion quantity before writing an equation.
02
Diagram and law
A free-body or motion diagram comes before the law. Use resultant force to connect interaction and acceleration.
03
Sign and units
Vector quantities depend on direction. Keep signs consistent and check that the final unit matches the requested quantity.
04
Körper und Stoffe
For “Körper und Stoffe”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
05
Masse
For “Masse”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
06
Volumen
For “Volumen”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
07
Dichte
For “Dichte”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
08
Kraft
For “Kraft”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
Physics
Разобранные примеры
Следуйте методу шаг за шагом и проверяйте обоснование каждого шага.
Worked motion example
Velocity changes from 2 m/s to 16 m/s in 7 s. Find the average acceleration.
1Define a positive direction.
2a = Δv/Δt = (16 - 2)/7.
3Interpret the positive sign and check the m/s² unit.
a = 2 m/s²
Reasoning example
Before calculating, explain the key idea from “Körper und Stoffe” and which conditions must be checked.
1Define the idea in one clear sentence.
2Connect it to a representation, law, or formula.
3State a restriction, unit, or final check that makes the solution valid.
The answer should show not only which rule is used for “Körper und Stoffe”, but also why it is valid here.
Mechanik
Практика с ответами
Восемь заданий от базовых навыков до экзаменационного уровня. Сначала решите самостоятельно.
Базовый навык4 минут
An object travels 420 m in 12 s. Find average speed.
Подсказка
v=s/t.
Ответ
v = 35.0 m/s.
Базовый навык5 минут
A 3 kg mass accelerates at 3 m/s². Find resultant force.
Подсказка
F=ma.
Ответ
F=9 N.
Применение6 минут
Structure a solution for “Volumen”: givens, SI units, law, substitution, and interpretation.
Подсказка
State the law before substituting numbers.
Ответ
A full solution states symbols/units, selects a valid law for “Volumen”, shows substitution and calculation, and interprets the result.
Применение7 минут
Identify three uncertainty sources in measuring “Dichte” and improve each one.
Подсказка
Consider instrument resolution, reaction time, repeats, and controls.
Ответ
A full response links each specific error source to a targeted improvement and identifies random or systematic impact.
Обоснование8 минут
Plan a suitable graph for “Kraft” data and explain how to obtain a gradient or relationship.
Подсказка
Put the independent variable on x and dependent variable on y.
Ответ
A full response labels axes/units, uses a suitable scale and best fit; gradient uses a large triangle and is interpreted with units.
Обоснование9 минут
Check whether a result for “Gewichtskraft” is sensible using units, order of magnitude, and a limiting case.
Подсказка
A check should not merely repeat the same calculation.
Ответ
A full check confirms dimensions/units, compares expected magnitude, and tests behaviour when one variable becomes very small or large.
Экзаменационный10 минут
Connect “Federkraft” to energy conservation or a force/field model and justify the choice.
Подсказка
Define the system and interactions.
Ответ
A full response defines the system, describes transfer or interaction, applies the appropriate model, and states losses or limitations.
Экзаменационный12 минут
Write a multi-step exam response about “Reibung” with calculation and evaluation.
Подсказка
Separate givens, model, calculation, result, and evaluation.
Ответ
A full response includes an appropriate diagram/model, laws, algebraic rearrangement, SI substitution, suitably precise result, and evaluation of assumptions.
Частые ошибки
Confusing velocity with acceleration.
Omitting a force or double-counting an action-reaction pair.
Using a motion equation without checking for constant acceleration.
Проверка понимания
✓I draw a correct force or motion diagram.
✓I select a law from the givens and conditions.
✓I interpret sign, direction, and unit.
Mechanik
Домашняя работа по главе
Шесть разных заданий от базового уровня до сложного с временем, подсказками и ответами.
Базовый8 минут
Homework 1: An object travels 60 m in 4 s. Find average speed.
Подсказка
v=s/t.
Ответ
v = 15.0 m/s.
Базовый10 минут
Homework 2: A 6 kg mass accelerates at 4 m/s². Find resultant force.
Подсказка
F=ma.
Ответ
F=24 N.
Углубленный12 минут
Homework 3: Structure a solution for “Volumen”: givens, SI units, law, substitution, and interpretation.
Подсказка
State the law before substituting numbers.
Ответ
A full solution states symbols/units, selects a valid law for “Volumen”, shows substitution and calculation, and interprets the result.
Углубленный15 минут
Homework 4: Identify three uncertainty sources in measuring “Dichte” and improve each one.
Подсказка
Consider instrument resolution, reaction time, repeats, and controls.
Ответ
A full response links each specific error source to a targeted improvement and identifies random or systematic impact.
Сложный18 минут
Homework 5: Plan a suitable graph for “Kraft” data and explain how to obtain a gradient or relationship.
Подсказка
Put the independent variable on x and dependent variable on y.
Ответ
A full response labels axes/units, uses a suitable scale and best fit; gradient uses a large triangle and is interpreted with units.
Сложный20 минут
Homework 6: Check whether a result for “Gewichtskraft” is sensible using units, order of magnitude, and a limiting case.
Подсказка
A check should not merely repeat the same calculation.
Ответ
A full check confirms dimensions/units, compares expected magnitude, and tests behaviour when one variable becomes very small or large.
50 минут / 40 баллов
Полный тест по главе
Полный тест с таймером, баллами и образцами ответов.
Start the timer when ready, work without notes, show every step, and open model answers only after finishing.
1. An object travels 160 m in 4 s. Find average speed.
2 баллов
Ответ
v = 40.0 m/s.
2. A 4 kg mass accelerates at 4 m/s². Find resultant force.
3 баллов
Ответ
F=16 N.
3. Structure a solution for “Volumen”: givens, SI units, law, substitution, and interpretation.
3 баллов
Ответ
A full solution states symbols/units, selects a valid law for “Volumen”, shows substitution and calculation, and interprets the result.
4. Identify three uncertainty sources in measuring “Dichte” and improve each one.
4 баллов
Ответ
A full response links each specific error source to a targeted improvement and identifies random or systematic impact.
5. Plan a suitable graph for “Kraft” data and explain how to obtain a gradient or relationship.
4 баллов
Ответ
A full response labels axes/units, uses a suitable scale and best fit; gradient uses a large triangle and is interpreted with units.
6. Check whether a result for “Gewichtskraft” is sensible using units, order of magnitude, and a limiting case.
4 баллов
Ответ
A full check confirms dimensions/units, compares expected magnitude, and tests behaviour when one variable becomes very small or large.
7. Connect “Federkraft” to energy conservation or a force/field model and justify the choice.
5 баллов
Ответ
A full response defines the system, describes transfer or interaction, applies the appropriate model, and states losses or limitations.
8. Write a multi-step exam response about “Reibung” with calculation and evaluation.
5 баллов
Ответ
A full response includes an appropriate diagram/model, laws, algebraic rearrangement, SI substitution, suitably precise result, and evaluation of assumptions.
9. Compare two methods for investigating “Druck in einfacher Form” and select the more reliable using criteria.
5 баллов
Ответ
The choice must use at least three comparable criteria and acknowledge one trade-off or limitation.
10. Create an extension question about “Arbeit”, a prediction, and a data-collection plan.
5 баллов
Ответ
A full response gives a testable question, justified prediction, independent-variable range, repeats, and an analysis method.
Раздел
Официальные источники
Источники программы; порядок тем уточняйте в школе и у преподавателя.
В первом сообщении укажите предмет, класс или экзамен и тему, которую нужно объяснить. Уточните у преподавателя, работает ли он с вашей программой и экзаменационной организацией.